Pan's Collection ☆since1993☆ 專業上門服務

the standards 窗簾標準

至多元化選擇
查詢 inquiry :24357465
至低價格保證
Whatsapp :90610326

 


  窗簾縫製標準        
          一等標準
click here
 

路軌安裝標準

劣等例子
click here
 
   

 

在這裡, 我們提供我們普遍採用的窗簾縫製標準(Pan's Curtain Making Standard),
固然, 閣下可以因應需要而選取附加的更高層次的高級縫製標準
又或者, 你可以指定使用更能節省車工費用, 簡單而價錢便宜一點的縫製方式, 豐儉隨意。

 

 

我們致力提供更高質素的產品, 歡迎閣下提供意見讓我們改善窗簾縫製標準。

歡迎電郵我們





...

CURTAIN MAKING STANDARDS

窗簾縫製標準(布料窗簾)
Guildlines for tailor made curtains 訂製窗簾縫製指引

 


unless otherwise specified...

除特別指明的情況外...

the curtain fabric will be inspected for obvious weaving, printing, dyeing, or other defects before sewing.
生產布窗簾前, 必需檢驗布料中織造, 印花, 染色或其他的缺點
Fabrics will be free of any obvious defects. Some fabrics show distinctive characteristics that are not defects (eg. raw silk).
布料窗簾應沒有明顯不良點
[然而請留意部份布料有獨特的點紋而非不良點(例如真絲)]
Curtain panels will be pattern matched wherever possible.

在可能的情況下對花

Curtains will be sewn with colour matching thread.
窗簾縫製用線應要配色
Curtains will be fitted with the correct hooks to suit the tracks or rod specified.
窗簾需用適當的四叉勾或窗簾勾掛上其所用的路軌上
Curtain headings, when drawn, should cover exposed track.
窗簾頂位當閉上窗簾時應遮蔽路軌
the linings must be shorter than the main curtain but not more than 2cm shorter.
窗簾夾裡布不應長過窗簾本身, 應比窗簾短不多於壹吋
To-the-floor curtains shall clear the floor by 1cm to less than 2.5cm.
落地窗簾長度應離開地面半吋至不多於壹吋
Due to climatic conditions, eg. humidity, fabrics lenghts may vary slightly. Fabric maunfacturer suggest that It is reasonable to accept a tolerance of 3% depending on climatic conditions.
布料隨氣候, 濕度會起變化. 布料生產商普遍同意3%的伸縮度是可以合理接受的
All curtains, where applicable, should have return ends.
窗簾的邊及腳位應有紙口摺疊並車縫妥當
For two-way, cord draw curtain units, the cutain should overlap in the middle.
對開兩邊的窗簾, 關閉後, 中間應有重疊位
Curtains shall have a minimum of approximately 100% fullness calculated on the finished headed size.
正常情況下, 用布量應是窗本身闊度的兩倍
All separate linings shall have a minimum of approximately 50% fullness calculated on the finished headed size of the linings.
掛裡布或掛遮光布(與窗簾面布可分開的裡布), 應最少使用完成窗簾闊度的1.5倍





.

GUIDELINES FOR CURTAIN TRACKS AND RODS PERTAINING TO THE CORRECT INSTALLATION
TRACK AND INSTALLATION STANDARDS
窗簾路軌及安裝標準


unless otherwise specified...

除特別指明的情況外...

for masonary fixing, a minimum of 8 gauge screws and plugs wherein the plugs are 25mm long and screws are 32mm long.

安裝上石屎/磚牆的情況下, 最低限度應使用 8 號 1.25 吋(32mm) 鑼絲配合1 吋(25mm)膠枳/木枳
for metal fixing, self tapping screws or pop rivets are required.
安裝上金屬的情況下, 應使用自攻鑼絲 或 拉釘
veneer walls require hollow wall anchors or toggle bolts or rawl-type nuts to be used if timbers cannot be located.
安裝上薄木板或石膏板的情況下, 應使用石膏板鑼絲及石膏板膠枳
for fixing timber, a minimum of 19mm x 6 gauge screws should be used.
安裝上木的情況下, 最低限度應使用 3/4"(19mm) 長 6 號 鑼絲
curtain tracks shall be installed to water level and secured in accordance with manufacturer's recommendations.
路軌應穩固安裝, 應平水, 及符合路軌生產商的安裝指引
intermediate brackets shall be installed at the intervals specified by the manufacturer and end brackets shall be used where applicable.
路軌應使用足夠的安裝碼及支點, 牢固安裝
track slides shall move freely and excess slide should be removed.
路軌的滑轆應可暢順行走,多出的滑轆應要移走
in two-way draw cord tracks, master runners shall overlap.
雙開窗簾的情況下, 兩幅窗簾的路軌匯合位置應有重疊位
in one-way draw cord tracks, the master runner shall carry the curtain past the end of the track.
單開窗簾的情況下, 路軌主導配件應可於窗簾蔽合時正面遮蓋整條路軌
all draw cord track cords shall be easily reached.
繩拉的路軌, 拉繩應位於容易拉動的高度
where possible, the tracks should be longer than the window, so that when the curtain is drawn back, the curatin will not cover too much of the pane.
路軌兩邊長度於可能情況下, 應比窗戶闊使窗簾布可收於窗兩邊牆身, 免於布簾遮蔽過多窗戶





.